Skip to content Skip to main navigation Skip to footer

How to set up and utilize Call Queues in the VOIP system

Overview: Call Queues allow several specific users the ability to answer an inbound call. When combined with other VoIP tools, they can become an important part of your overall VoIP routing plan. This article will explain how to create a call queue, and cover some of the ways a call queue can be utilized to meet your specific business needs.

Getting started with Call Queues

In order to create or edit a Call Queue, a domain administrator needs to log into the e-vergent VoIP portal at voip.e-vergent.com. Visit https://support.e-vergent.com/knowledge-base/voip-user-portal/ for more information about logging into the VoIP portal.

Figure 1

Creating a New Call Queue

Once logged in, the administrative user will see a square box near the top of the page labelled Call Queues. Figure 1 shows what the user should be seeing after clicking this box. To create a new Call Queue, click the box labelled “Add Call Queue” as pointed out in Figure 1. This will open a new box with several tabs used to setup the Queue. These tabs are outlined below

Figure 2

The Basic tab allows you to name the queue, choose an extension number, setup a department and site (if necessary), and choose the type of call queue you want to use. Note: To see a description of what each option does, hover over the information icon next to the option. Direct Phone Numbers are rarely used in this part of the setup.

Figure 3

The Pre Queue Options tab allows you to set certain parameters that dictate what will happen when calls go into the queue. Many of these setting can be left at their default settings if the call queue is less than 5 users. For larger queues, or ques that require a more technical setup, please contact e-vergent. Forward if unavailable is an option to spill over call traffic when all users in the queue are unavailable (optional). Again, there are information icons that generally describe the function of each option.

Figure 4

The In Queue Options tab will determine how long calls will ring agents in the queue (timeout), whether or not you want the Call Queue to have a voicemail box (not mandatory) and what will happen if a call comes to the queue and is not answered.

In the case shown in Figure 4, the calls will ring the queue for 30 seconds (timeout), if unanswered after that time, the call will go to the voicemail of extension 101 (User one).

Adding Agents to the Call Queue

Figure 5

To add a user to a call queue, click the number listed under the heading titled “Agents (Available)”. This is pointed out in figure 5. A new box will open, choose add agent. When this is chosen, another screen will appear as shown in Figure 6.

Figure 6

In this screen you can add the user by name or extension and change specific setting for the user. You can add several agents at the same time. The most common change to individual agents is “Queue priority for agent”. This is especially helpful for agents in multiple Call Queues as it designates the agents priority in each queue. 1 is the highest priority.

Utilizing your newly created Call Queue

The newly created Call Queue can be utilized in several ways in the domain’s routing tree. In the example below, we are setting it up as a destination for a specific phone number. This will route all inbound calls going to the phone number into the Call Queue to be answered. A Domain Administrator can complete this task from the VoIP portal landing page by choosing the box labelled “Inventory”, choosing phone numbers, then choosing the phone number they wish to use with the queue (Figure 7).

Figure 7

In the example shown in Figure 7 the “Call Queue” dropdown option was chosen, under the treatment dropdown, the desired Call Queue was chosen. In this example, any inbound call to 847-693-4900 will route to the Call Queue named “TEST Queue”. In turn, this will ring the agent’s phones as specified in the call queue setup.

***NOTE: It is important the Enable DID option shown in Figure 7 is set to “Yes”.***

Conclusion: Every client’s specific needs are different and there are many ways to utilize Call Queues within your Domain routing tree.

Please reach out to an e-vergent support professional with any questions about how you may be able to utilize this feature.

Was This Article Helpful?